Pool brick standard construction process: the preparation to processing interface, the pool structure waterproof layer to leveling of the pool, pool screed-coat waterproof - stickup ceramic tile, professional caulking - a clean face

1, a pool of waterproof, facing the preparing work before construction
(1) measure pool structure dimensions, especially the swimming pool is 50 m length, the size of the verticality, depth, whether standing decorate allowance.
(2) swimming pool pool body casting is complete and achieve after curing period should be experimental, check whether there is leakage of reinforced concrete pool body, water seepage phenomenon, if there is a mark shall be immediately in the region of the leakage, water seepage and find the reason, for plugging work structure, key processing before doing waterproof construction.

2, base construction scheme in the interface
In order to change the old and new base level between the cohesive force and surface roughness, guarantee the construction quality of waterproof process, Suggestions for an interface treatment on the surface of the primordium.

3, the structure of the swimming pool, waterproof construction scheme
Waterproof material: on the one hand, waterproof material not only depends on the coating surface, more importantly it can penetrate the material within the crystals, closed water channel, to achieve waterproof. On the other hand, waterproof material must have a certain flexibility can cover hairline cracks, against a slight vibration.

4, leveling layer construction scheme of swimming pool
Swimming pool leveling layer thickness is differ, in order to increase the adhesion fastness of the leveling layer, prevent the empty drum, it is recommended to use highly respected cement mortar additives, the additive emulsion avirulent environmental protection, can improve the bond strength of cement mortar and flexibility.

5, leveling layer of waterproof construction scheme of swimming pool
Swimming pool screed-coat after completion of construction, in order to increase the effect of waterproof, it is recommended to do it again on the leveling layer waterproof.

6, swimming pool tile, caulking construction plan
(1) measuring and marking: according to the cloth brick process diagram, based on the center line on both ends by 2.5 m to each side for the unit, 25 m wide and 10, the error points in 10 case; Based on the center line according to the 1.0 m on both sides for the unit to the two end points, 50, 50 m error points into 50 lattice; 1 m * 1 m to paste 32 meters square pool dedicated ceramic tile (longitudinal 4 piece, transverse 8).
(2) elevation and mark: stickup ceramic tile from both ends of the wall, determine the shore of the horizontal line on both sides of the pool at the same time, strive to pool ends on both sides of the pond shore level elevation error is not more than + / - 5 mm.
Ends at the same time, on both sides of the wall and bottom of ceramic tile brick joints shall be in accordance with the ceramic tile modulus straight, can't break, don't cut (except slope) on either side of the pool wall, brick lane marker should be in accordance with the requirements of the rules of the game in a dark blu